Tips For Troubleshooting Your Home Alarm System In Baton Rouge
False alarms and system glitches can be frustrating, and more importantly, may prevent your home security system from working the way it should. Fortunately, most troubles, from dead batteries to false alarms, are easy to remedy. Take a look at our tips for troubleshooting your home alarm system in Baton Rouge. We’ll help you keep your family shielded and your system operating the way it should.
Test Your Home Security System In Baton Rouge
One of the most effective ways to troubleshoot your home’s security is to test it! The latest systems have a test mode so you don’t accidentally initiate an emergency response from monitoring agents. After switching to test mode, do the following:
- Activate your system as you would when you exit your home.
- Open a window or door that has a contact sensor, or try to set off another device. Shut the door or window once you’re finished so it doesn’t trigger the alarm when you get out of test mode.
- Allow the alarm to resonate for 60 seconds to ensure communications with the security provider and to produce an entry in the alarm system log.
- Proceed to test sensors as needed
- Review the system activity log to confirm that everything’s working.
Don’t worry, monitoring specialists can see that your alarm system is undergoing a test. Just make sure to switch out of test mode when complete. It’s smart to test once a month or whenever you make changes to your home’s internet or phone provider.
Check The Placement And Condition Of Motion Detectors
Although an crucial element of your alarm system, motion sensors are well known for false alarms. You can help prevent them with some easy troubleshooting.
- Conduct a visual check. Are there things that could move within the sensor’s detection zone, like a window treatment taken by a breeze?
- Is the sensor covered in dust? Cobwebs, dirt, and debris can result in poor performance. Check to confirm the device is clean.
- Does the motion detector come with pet immunity you can activate? Some sensors can be set to disregard pets up to 100 pounds.
- When was the battery changed? A low battery may impact performance or cause false alarms.
- Is a heat source affecting the sensor? Excess heat from sunlight or a fireplace can set off an alarm.
Keep Batteries Ready And Watch Out For Low Battery Signals
One of the great things about new home security systems is that they’ll let you know when batteries are getting low. If your system is equipped with a control panel or app, you’ll often find notifications there. Depending on your alarm, you might detect an occasional beep when batteries are low.
Contact sensors, motion detectors, smoke detectors, and other wireless components have batteries that will have to be replaced every so often. It’s wise to keep batteries ready and establish a replacement schedule. Some systems also have a backup battery for the main control panel. This backup keeps your system operating if your power goes out and should charge back up once the electricity is working again. If it doesn’t, you should replace it.
Troubleshooting Is Easy With ADT Home Security In Baton Rouge
As the foremost name in home security, ADT designs systems that offer superior functionality and protection. Getting into test mode is straightforward through the ADT+ app or MyADT.com, and you’ll always receive notifications when a sensor battery is nearing depletion. Reach out to Secure24 Alarm Systems, an authorized ADT dealer, to get more details and design a system perfect for your Baton Rouge home and family. Dial (225) 230-5215 or complete our form today!